Capability and parameter:

1.Flat blow molding, man-machine interface, easy and intuitive; automatic fault detection alarm system guarantees the normal operation of the equipments pneumatic components and servo motor lead screw are used;

2.The performance is superior and stable; the secondary auxiliary molding depth can be up to 30MM (to be customized upon in excess of 30MM), parallel bars are used for the mold frame to locate, and X/Y axis is fine-tuned with micrometer, saving time to adjust the mold; automatically cut after setting the production quantity, to save labor and raw materials to the maximum extent. A carrier tape quality detector is loaded optionally.

1.Automatically detect the emptying-warm-up-heat-mold-push (E value protection)-punch-tape-automatically detects the materials received-automatically cut after reaching the set value.

1.The heating time: 0.65 second

2.Blow molding time: 0.65 second

3.Tape speed:13M

4.Tape length:120M

5.Tape depth is up to 35MM

6.Length in production:60.6M

7.The production of the applicable 12mm to 88mm carrier tapes

8.Tape length is up to 120MM;

9.The highest theoretical speed in production can be up to 450m/h(the speed of commissioning shield carrier tapes of our company reaches 380m/h).